Rotary Drum Batch Mixer
Truncated Cone
|
Feature |
Continental Rollo-Mixer ®
|
| 12 rpm |
Drum Speed |
3 rpm |
| Low |
Energy Requirement |
Lowest in the Industry |
| 4 Divisions |
Divisions per rev. |
25 Divisions |
| 2-3 Minutes |
Mix Time |
2-3 Minutes |
| Gravity |
Load In and
Discharge Style |
Gravity |
| Tumble, Turn, Cut & Fold |
Mix Action |
Gentle: Mixer creates rivers of material which are divided & Combined by gravilty in all planes |
| Alloy steel trunion roller assemblies expensive to replace |
Maintenance |
Periodic lubrication of drive chain and bearings |
| Bolted Internal Flighting w/ Optional Full Seam Welded Construction |
Internal Flighting |
Standard Full Seam Welded Construction |
| Internal tip sprays wide pattern on to a rolling "bed" of material |
Liquid Addition |
Liquids are uniformly dispersed directly onto the particles with Award Winning - "Free-Fall Processing" |
| Spray tip is centrally located inside the vessel and is difficult to access |
Spray Tip Access |
Spray lance is accessable from outside the front of the Rollo-Mixer ® |
| Multi-Component Drive System involving belts, trunions and gears |
Mechanical Drive System |
Only one moving part, two main bearings and drive chain. No trunions or tolerances to maintain. |
| Longer Pofile - Load-In and Discharge on opposite ends of mixer |
Space Requirement |
Compact Design - Load In and Discharge on same end of mixer |
| None |
Online Visibility |
Product mixing can be viewed from both front and rear of mixer |
| 2-3 minutes |
Discharge Time
(286 ft3@ 35 lbs/ft3) |
2-3 minutes |
| 3 to 1 |
Turn Down Ratio |
10 to 1 |
| Dependant on concentricity of rotating drum |
Mixer sealability |
Gas tight, water tight, dust tigh in all phases of mixing cycle |
| 2 Versions available in limited sizes from .25 to 600 ft3 |
Models Available |
3 Versions available in 125 sizes from 3.5 to 1600 ft3 |
| Sold through Manufacturers Rep. Network |
Customer Contact |
Works Directly with Customers |
