Rotary Drum Batch Mixer
Auger Type
|
Feature |
Continental Rollo-Mixer ®
|
| Auger In & Auger Out |
Load In and
Discharge Style |
Gravity |
| Lifting paddles feed material forward and drop into center mounted, flow-thru screw trough |
Mix Action |
Gentle: Product Divides & Combines by Gravity Throughout Batch Cycle |
| Combined motors = Twice the Horsepower |
Energy Requirement |
Lowest in the Industry |
| 18 rpm |
Drum Speed |
3 rpm |
| Not applicable |
Divisions per rev. |
25 Divisions |
| 30 seconds per ton |
Mix Time |
2-3 Minutes |
| Muliple Drive components including belts, cam rollers and gear boxes |
Maintenance |
Periodic lubrication of drive chain and bearings |
| Liquids are applied onto moving particles above auger trough |
Liquid Addition |
Liquids are uniformly dispersed directly onto the particles with Award Winning - "Free-Fall Processing" |
| Requires Confined Space Entry permit and removal of safety screens access panels |
Spray Tip Access |
Spray lance is accessable from outside the front of the Rollo-Mixer ® |
| Requires 2 drive motors, belts, trunions, gears and many moving parts |
Mechanical
Drive System |
only one moving part, two main bearings and drive chain. No tolerances to maintain. |
| Similar |
Space Requirement |
Load-In and Discharge on same end of mixer |
| 2-3 minutes |
Discharge Time |
2-3 minutes |
| None |
Online Visibility |
Product mixing can be viewed during operation from both front and rear of mixer |
| Dependant on concentricity of rotating drum |
Mixer Sealability |
Gas tight, water tight, dust tigh in all phases of mixing cycle |
| 8 to 1 |
Turn Down Ratio |
10 to 1 |
| Sold directly or through Manufacturers Rep. Network |
Customer Contact |
Works Directly with Customers |
| 4 Sizes - 33, 67, 133, 200 & 267 ft3. |
Models Available |
3 Versions available in 125 sizes from 3.5 to 1600 ft3 |
